Product group image
Application picture
Application picture
1   1

Repair pad FIX IT

To repair over-sized or damaged drill holes

The repair pad FIX.it is a solution for installing a plastic fixing into a too-large or fractures drill hole. As a result the existing drill hole can be used. fischer FIX.it is a repair pad covered with a special mortar. This is moistened before use, wound around the plug and pushed into the fractured or too-large drill hole. For larger tolerances, the pads can also be used in layers. The repair pad is hardened after just three minutes. This saves time during the installation process.

Product Description

Advantages
  • Using FIX IT means that you can avoid having to drill another hole, and makes it possible to reuse a pre-existing drill hole.
  • The repair pad FIX IT can be used as a single layer or as multiple layers, and thus can be flexibly adapted to suit various drill hole sizes and shapes.
  • The pad, which is covered with a special mortar, hardens after only approx. three minutes in the drill hole. This allows for a fast installation of the fixture.

Available Product Variants

Application and Permission

Applications
  • To repair over-sized or damaged drill holes for use with plastic plugs
Building materials
  • Concrete
  • Cavity floor slabs made from bricks and concrete or similar
  • Vertically perforated brick made from lightweight concrete
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Aerated concrete
  • Solid brick made from lightweight concrete
  • Solid brick
* You can find detailed information on building materials in the registration document.

Assembly Instruction

Functioning
  • The pad, which is covered with a special mortar, hardens in the drill hole, thus anchoring the plug securely in the damaged or over-sized drill hole.
  • Wet the pad with water, wrap it around the plug and push it into the damaged drill hole.
  • After about three minutes the special pad will harden and the fixture can then be attached.
  • Use several pads for larger tolerances.
  • The curing time for the first pad is approx. three minutes. Add an additional minute for each additional pad used.
Installation graphic
Installation graphic
Installation graphic
Installation graphic
fe80::1c61:2ad1:f52e:7ce5%5