33 mm high aluminium rail for PV panels mounting systems.
Rail SolarLight
SolarLight is a 33 mm high aluminium rail for PV mounting systems, particularly suitable for pitched roofs with fastening points close to each other. The two side grooves and the lower groove are compatible with SKS M8 screws or RHS hammer head screws. SolarLight is compatible with PM U / PMC U universal clamps. SolarLight is compatible with PV systems on pitched roofs(in combination with aluminium and stainless steel hooks), non-removable corrugated panel or barrel/flat tile roof (in combination with STSR and STSI double-threaded screws) and trapezoidal metal sheet roof (in combination with DLA and DLAK clamps).
Compatible with installation both from the side and from the bottom.
Compatible with SKS M8 hexagonal screws or RHS hammer head screws.
Suitable for the quick couplings of the aluminium hooks.
Properties
Aluminium alloy AW 6063 T6 in accordance with EN 755-2:2013.
Application and approval
Applications
Aluminium rail for PV panels mounting systems with PM U and PMC U clamps in combination with tiles hooks, double-threaded screws, triangles and standing seam clamps.
Assembly instruction
Functionality
Identify the correct support components based on the type of roof (e.g. tile hooks, double threaded-screws, triangular frames, standing seam clamps, etc).
Position the rail on the support components (use SOLARPANEL-FIX software to design the system).
Use 1 CPN AL joint on both sides to connect the rails (a complete connection requires 2 CPN AL joints).
Slide the CPN AL joint until the central stud touches the end side of the rail.
Every CPN AL joint has to be connected to the rails with two 3.5 mm x 9.5 mm self-drilling screws (two screws per rail side).
Consider a thermal break of at least 50 mm every 15 m.
