Application picture
Application picture
1   1

fischer Insulation support DHK 60

The cost-effective plastic insulation support for all soft insulating boards.

Art.-No. 80938
Top Features
  • Reduced drilling. Optimised geometry lowers anchorage depth.
  • Permanent pressure due to flexible pins in the disc area.
  • Simple Hammerset installation saves time and costs.
  • The colouring means that it does not stand out on black clad insulating material.

Sales to

Payment

Delivery

Product Description

The fischer insulation support DHK is the cost-effective plastic insulation support for insulating boards with low compressive strength. The DHK is knocked in the push-through installation using a hammer. When knocking in, the ribs expand in the drill hole and the DHK is ideally pressed in. The fischer insulation support DHK is suitable for anchoring insulating boards in solid and perforated brick, concrete, and aerated concrete.
Advantages
  • The optimised geometry of the expansion section ensures a low anchorage depth and reduces the amount of drilling required.
  • Flexible pins in the plate area adapt to the insulating material, and ensure a sustained contact pressure.
  • The simple hammerset installation allows for a quick installation process and thus reduces workload.
  • The colouring of the DHK means that it does not stand out on black clad insulating material in rear-ventilated façades.

Application and Permission

Applications
To fix soft and pressure-resistant insulating materials in rear-ventilated façades, such as:
  • Mineral / glass wool
  • PU panels
  • Light building boards made of wood wool
  • Cork boards / coir matting
  • Polystyrene
  • Foam glass tiles
Building materials
  • Concrete
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Aerated concrete
  • Solid brick made from lightweight concrete
  • Solid brick
* You can find detailed information on building materials in the registration document.

Assembly Instruction

Functioning
  • The DHK is set in push-through installation using a hammer.
  • The expansion of the ribs in the drill hole gives the DHK an ideal contact pressure.
  • Temperature range when installed: -40°C to +80°C.
Installation graphic
Installation graphic
Installation graphic

Technical Data

Technical Data

Drill hole diameter 8 [mm]
Min. drill hole depth 30 [mm]
Effect. anchorage depth 20 [mm]
Anchor length 85 [mm]
Max. fixture thickness 60 [mm]
Amount 250 Unit(s)
GTIN (EAN Code) 4006209809389

Documents for Downloading

Additional Documents

10.209.131.18