Product Category Picture
Application Picture
Application Picture
1   1

Render fixing FIF-PN

The pre-assembled drive anchor with reinforced plastic nail

The ETA approved fischer render fixing FIF-PN is ideal for securely fixing pressure-resistant insulation up to 190 mm thick in the plaster façade such as polystyrene boards, wood wool lightweight panels and PU panels in concrete, solid and perforated brick. The fischer render fixing FIF-PN comprises a grey plug sleeve with preshaped octogonal disc and a plastic nail. The FIF-PN is set using a hammer. This saves time and money. The integrated hammer-in stop prevents the fixing from expanding prematurely, thus enabling a problem-free installation. The glass-fibre-reinforced plastic nail reduces the heat transmission and prevents marks on the plaster surface.

Product Description

  • To set with few hammer blows.
  • The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
  • Optimised retention forces thanks to the glass fibre reinforced plastic nail (GRP).
  • Small anchoring depth of 35 mm saves on drilling times.
  • Thanks to the GRP nail, the fixing is free of thermal bridging with the Chi value 0.000 [W/K].
  • The compression zone in the shank allows the disc to be drawn precisely into the insulation.
  • For insulating material thicknesses up to 180 mm.

Available Product Variants

7 Product variant (s) found

7 Product variant (s) found

Drill diameter


Min. drill hole depth


Anchor length


Art.-No. 546803

8 [mm]

45 [mm]

108 [mm]

Art.-No. 546804

8 [mm]

45 [mm]

128 [mm]

Art.-No. 546805

8 [mm]

45 [mm]

148 [mm]

Art.-No. 546806

8 [mm]

45 [mm]

168 [mm]

Art.-No. 546807

8 [mm]

45 [mm]

188 [mm]

Art.-No. 546808

8 [mm]

45 [mm]

208 [mm]

Art.-No. 546809

8 [mm]

45 [mm]

228 [mm]

Legend = Permission Available = Permission not Available
Viewed 7 of 7 variant (s)

Application and Permission

  • Attachment of ETICS insulating boards on concrete and masonry
  • Flush-to-surface installation in ETICS insulating materials e.g. polystyrene
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Building brick
  • Solid sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Lightweight aggregate concrete
  • Aerated concrete
* You can find detailed information on building materials in the registration document.


  • ETA-18/0253
  • DoP No. 0144

Assembly Instruction

  • The fixing is set in push-through installation.
  • Simple, fast setting by driving the GRP nail in using a standard hammer.
  • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading


Title Type Created Valid Till
ETA Certification Document (PDF, 2 MB) European Technical Assessment for FIF - PN - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry ETA-18/0253 5/29/2018
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0144 6/5/2018

System Components & Related Categories