Product Category Picture
Application Picture
Application Picture
1   1

Render fixing FIF-CN II

The pre-assembled drive anchor with innovative steel-plastic nail

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

Product Description

Advantages
  • To set with few hammer blows.
  • The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
  • High retention forces thanks to the steel tip of the compound nail.
  • Small anchoring depth of 35 mm saves on drilling times.
  • The FIF-CN II is virtually free of thermal bridging due to the compound nail.
  • The compression zone in the shank allows the disc to be drawn in precisely.
  • For insulating material thicknesses up to 340 mm.

Available Product Variants


15 Product variant (s) found

15 Product variant (s) found

Variant
ETA-approval
Drill diameter

d0

Min. drill hole depth

h1

Anchor length

l

Art.-No. 546443

8 [mm]

45 [mm]

108 [mm]

Art.-No. 546444

8 [mm]

45 [mm]

128 [mm]

Art.-No. 546445

8 [mm]

45 [mm]

148 [mm]

Art.-No. 546446

8 [mm]

45 [mm]

168 [mm]

Art.-No. 546447

8 [mm]

45 [mm]

188 [mm]

Art.-No. 546448

8 [mm]

45 [mm]

208 [mm]

Art.-No. 546449

8 [mm]

45 [mm]

228 [mm]

Art.-No. 546450

8 [mm]

45 [mm]

248 [mm]

Art.-No. 546451

8 [mm]

45 [mm]

268 [mm]

Art.-No. 546452

8 [mm]

45 [mm]

288 [mm]

Art.-No. 546453

8 [mm]

45 [mm]

308 [mm]

Art.-No. 546454

8 [mm]

45 [mm]

328 [mm]

Art.-No. 546455

8 [mm]

45 [mm]

348 [mm]

Art.-No. 546456

8 [mm]

45 [mm]

368 [mm]

Art.-No. 546457

8 [mm]

45 [mm]

388 [mm]

Legend = Permission Available = Permission not Available
Viewed 15 of 15 variant (s)
0

Application and Permission

Applications
  • Attachment of ETICS insulating boards on concrete and masonry
  • Flush-to-surface installation in ETICS insulating materials and mineral wool e.g. polystyrene
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Full blocks made from concrete
  • Building brick
  • Solid sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Lightweight aggregate concrete
  • Aerated concrete
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-18/0393
  • DoP No. 0143

Assembly Instruction

Functionality
  • The fixing is set in push- through installation.
  • Simple, fast setting by driving the compound nail in using a standard hammer.
  • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA Certification Document (PDF, 2 MB) European Technical Assessment for fischer FIF-CN II ETA-18/0393 5/29/2018
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0143 6/6/2018

System Components & Related Categories

fe80::2c4a:5a3:f52e:7cbf%4