The undercut anchor for thin fibre cement façade panels by Equitone

Zykon-Panel anchor FZP II T Tergo+

Name: Zykon-Panel anchor FZP II T Tergo+
Brand: fischer

The undercut anchor for a concealed fixing of EQUITONE fibre cement panels. Use in conjunction with clasp systems or with other attachments.

7 product variants

Anchorage depth

Min. panel thickness

Type

Projection length

Thread

Cylindrical diameter

Viewed 7 of 7 variant (s)

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

dry drilling in fibre cement
the drill hole is drilled with an absolute anchoring depth
flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
drilling: first cylindrical, then conical - to create the undercut.
inserting the undercut anchor in the cylindrical-conical undercut hole
expanding the undercut anchor by "pressing down" the washer using the setting tools
stress-free and geometrical inter-locking fixing

Product Variant