Name: fischer Clasps FHC 20x3 60/hex/SP AL EPDM
Brand: fischer

Sliding point clasp for ATK 103 P20 or S20 with hexagonal hole and EPDM.

Advantages

Clasps can be pre-assembled, saving time on the construction site.
Fast and easy installation of façade panels thanks to the coordinated geometries of the clasps and horizontal profiles.

The sliding point clasp of the BWM horizontal subframe system ATK 103 is made of an open C-profile and representss the geometric counterpart to the ATK 103 horizontal profiles. This combination allows the façade panels, which are fastened with undercut anchors, to be suspended quickly and efficiently. In addition, the sliding point clasps absorb the wind loads proportionally and transfer them to the horizontal profiles.

Properties

Aluminum (e.g. EN AW 6063, 6061)

Applications

As a suspension element in the horizontal profile for subframe systems ATK103 and SystemOne BS in ventilated rainscreen façades.
As suspension clasps for suspension nuts for pure vertical substructure systems for ventilated curtain walls.

Building materials

Natural stone (≥ 20mm)
Artificial concrete panels (e.g. GFRC, UHPC, etc.)
Ceramics
Porcelain stoneware
Fibre cement
HPL panels
Solid surface panels
Thin panel materials (≥ 8 mm)

You can find detailed information on building materials in the approval document.

Approval

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Created on 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Created on 05/08/2024

System	ATK103
Dimensions( d )	10.2 mm
Width( W )	60 mm
Height( H )	62 mm
Depth( D )	20 mm
Thickness( T )	3 mm
Hole-ø( D )	10,2 mm
Thread( M )	M6
Colour	aluminium
Amount	1 pcs
Contents	100 x Clasps with EPDM coating
GTIN (EAN-Code)	4048962383751
BWM	28560

fischer Clasps FHC 20x3 60/hex/SP AL EPDM

Your advantages / Product description

Application and approval

Assembly instruction

Technical Data

Documents for Downloading