Product group image
Application picture
Application picture
1   1

Injection mortar FIS EM Plus

The powerful injection mortar for rebar connections and cracked concrete

The fischer injection mortar FIS EM Plus is a high-quality epoxy mortar for top load-bearing capacity in cracked and non-cracked concrete and for seismic applications in performance categories C1 and C2. It is suitable for fixations of shear connectors for concrete layers, tall shelvings, and heavy steel constructions both inside and outside. The injection mortar is processed with the approved system components fischer threaded rod FIS A with variable anchorage depths and fischer internal threaded anchor RG M I as well as with reinforcement bars. The epoxy mortar is ideally suited for rebar connections that are installed with a large drill hole diameter and a high anchorage depth. It can also be used for diamond-drilled and water-filled drill holes.

Product Description

Advantages
  • The optimised formulation of the epoxy mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
  • The mortar can be used for rebar connections from diameter 8 to 40 mm.
  • With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
  • Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
  • For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5° C.
  • The mortar is approved for diamond-drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2 and thus offers safety under extreme conditions.

Available Product Variants

Application and Permission

Applications
  • Post-installed rebar connections
  • Jointers for concrete layers
  • Rim beam anchorings
  • Seismic applications
  • Anchorings in diamond-drilled or in waterfilled drill holes
  • Heavy steel constructions
  • Silo installations
  • Tall shelving
  • Sound barriers
  • Temporary or removable fixings (with internal threaded anchor RG M I)
Building materials
Approved for anchorings in:
  • Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
  • Natural stone with dense structure
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-17/0979
  • ETA-17/1056
  • DoP No. 0135
  • DoP No. 0137
  • ESR-1990
  • GS 3.2/18-020-2 Ä
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
  • The mortar is injected bubble-free from the drill hole base.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
  • The anchor is set manually by lightly rotating it until it reaches the drill hole base.
  • During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 12 MB) European Technical Assessment for fischer injection system FIS EM Plus, Bonded fastener for use in concrete ETA-17/0979 12/6/2018
ETA - European Technical Assessment (PDF, 3 MB) ETA-17/1056 12/13/2017
DOP - Declaration of Performance (PDF, 8 MB) DoP No. 0135 4/12/2018
DOP - Declaration of Performance (PDF, 6 MB) DoP No. 0137 12/21/2017
ICC-Approval (PDF, 840 KB) ESR-1990 9/1/2017 9/30/2019
Test report (fire protection) (PDF, 20 MB) GS 3.2/18-020-2 Ä 5/1/2018 5/31/2023
Curing time (PDF, 94 KB) Curing times

System Components & Related Categories

fe80::1462:2e2c:f52e:7ce6%8