Product group image
Application picture
Application picture
Video
1   1

UMV multicone dynamic bonded anchor

The threaded rod for the capsule system UMV multicone dynamic for anchoring dynamic loads

The fischer multicone dynamic threaded rod UMV-A dyn is processed with the UMV-P multicone resin capsule. It has general building regulations approval for dynamic applications in cracked concrete. The cone shape of the UMV-A dyn anchor rod ensures a controlled expansion under dynamic stress. It is ideal for supporting dynamic loads from jib cranes, production robots and guide rails indoors. Installation is possible in the time-saving push-through installation and in pre-positioned installation. During setting, the threaded rod destroys the resin capsule, and mixes and activates the mortar.

Product Description

Advantages
  • The bushing fills the annular gap in the fixture and, in combination with the anchor rod UMV-A dyn, ensures an even load distribution. This allows for the bearing of dynamic alternating loads.
  • The cone shape of the UMV-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete.

Available Product Variants

Application and Permission

Applications
  • Jib cranes
  • Gantry and overhead cranes
  • Guide rails for elevators
  • Antennas and transmitter masts
  • Production robots
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

Functioning
  • The bonded anchor suitable for tensile zones consists of the UMV multicone dynamic anchor rod and the UMV multicone resin capsule.
  • UMV multicone dynamic is suitable for pre-positioned and push-through installation.
  • During setting (rotating/hitting), the tip of the anchor rod destroys the capsule in the drill hole, and mixes and activates the mortar.
  • The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
  • Once the fixture has been positioned, the installation sleeve is used to drive the bushing over the anchor rod.
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Show assembly instruction as PDF

Documents for Downloading

System Components & Related Categories

fe80::283b:1a2:f52e:7ce5%9